Home › Vehicle Interior › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Power Seat)
RM27L0U _58 Vehicle Interior _049342 SEAT _0235870 LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Power Seat) G

SEAT  LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Power Seat)  INSPECTION  


PROCEDURE

Hide 72760D 1.INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY LH

B443356E01
1.083,0.188 1.531,0.365 0.448,0.177 10 false HOLD 2.5,0.198 3.219,0.385 0.719,0.188 10 false RELEASE 4.406,0.188 6.844,0.698 2.438,0.51 10 false Component without harness connected: (Lumbar Support Adjuster LH)

a.

Check operation of the lumbar support adjuster.

i.

Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminals.

OK:
Measurement Condition Operation Direction
Battery positive (+) → 1
Battery negative (-) → 2
Hold
Battery positive (+) → 2
Battery negative (-) → 1
Release


If the result is not as specified, replace the lumbar support adjuster assembly LH.



Hide 72750D 2.INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY RH

B443356E02
1.083,0.188 1.531,0.365 0.448,0.177 10 false HOLD 2.5,0.198 3.219,0.385 0.719,0.188 10 false RELEASE 4.406,0.188 6.823,0.635 2.417,0.448 10 false Component without harness connected: (Lumbar Support Adjuster RH)

a.

Check operation of the lumbar support adjuster.

i.

Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminals.

OK:
Measurement Condition Operation Direction
Battery positive (+) → 2
Battery negative (-) → 1
Hold
Battery positive (+) → 1
Battery negative (-) → 2
Release


If the result is not as specified, replace the lumbar support adjuster assembly RH.