Home › Vehicle Interior › SEAT › REAR SEAT CUSHION HEATER
RM27L0U _58 Vehicle Interior _049342 SEAT _0235874 REAR SEAT CUSHION HEATER G

SEAT  REAR SEAT CUSHION HEATER  INSPECTION  


PROCEDURE

Hide 87510P 1.INSPECT REAR SEAT CUSHION HEATER ASSEMBLY LH

B200252E01
0.191,0.125 2.683,0.481 2.492,0.356 10 Component without harness connected: (Rear Seat Cushion Heater)

a.

Heat the thermostat with a light.


b.

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Thermostat temperature 25°C (77°F) Below 1 Ω
1 - 5 Seat cushion heater temperature 20°C (68°F) 3.0 to 3.6 Ω
3 - 4 Seat cushion heater temperature 15°C to 30°C (59°F to 86°F) 8.2 to 14.9 kΩ


If the result is not as specified, replace the seat cushion heater.



Hide 87510P 2.INSPECT REAR SEAT CUSHION HEATER ASSEMBLY RH

B200252E01
0.191,0.125 2.683,0.481 2.492,0.356 10 Component without harness connected: (Rear Seat Cushion Heater)

a.

Heat the thermostat with a light.


b.

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Thermostat temperature 25°C (77°F) Below 1 Ω
1 - 5 Seat cushion heater temperature 20°C (68°F) 3.0 to 3.6 Ω
3 - 4 Seat cushion heater temperature 15°C to 30°C (59°F to 86°F) 8.2 to 14.9 kΩ


If the result is not as specified, replace the seat cushion heater.