Home › Vehicle Interior › SEAT › FRONT SEAT CUSHION HEATER
RM27L0U _58 Vehicle Interior _049342 SEAT _0235875 FRONT SEAT CUSHION HEATER G

SEAT  FRONT SEAT CUSHION HEATER  INSPECTION  


PROCEDURE

Hide 87510L 1.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH

B201590E01
0.191,0.272 2.687,0.629 2.496,0.357 10 Component without harness connected: (Front Seat Cushion Heater) 0.977,1.786 1.109,1.953 0.132,0.166 10 A 2.589,1.786 2.720,1.953 0.132,0.166 10 B

a.

Heat the thermostat with a light.


b.

Check the seat cushion heater.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-1 - A-4 Seat cushion heater temperature 20°C (68°F) 3.0 to 3.6 Ω
A-1 - B-1 Seat cushion heater temperature 20°C (68°F) 3.0 to 3.6 Ω
A-2 - A-3 Seat cushion heater temperature 15°C to 30°C (59°F to 86°F) 8.2 k to 14.9 kΩ
A-1 - B-2 Thermostat temperature 25°C (77°F) Below 1 Ω


If the result is not as specified, replace the seat cushion heater.



Hide 87510K 2.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH

B201590E01
0.191,0.272 2.687,0.629 2.496,0.357 10 Component without harness connected: (Front Seat Cushion Heater) 0.977,1.786 1.109,1.953 0.132,0.166 10 A 2.589,1.786 2.720,1.953 0.132,0.166 10 B

a.

Heat the thermostat with a light.


b.

Check the seat cushion heater.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-1 - A-4 Seat cushion heater temperature 20°C (68°F) 3.0 to 3.6 Ω
A-1 - B-1 Seat cushion heater temperature 20°C (68°F) 3.0 to 3.6 Ω
A-2 - A-3 Seat cushion heater temperature 15°C to 30°C (59°F to 86°F) 8.2 to 14.9 Ω
A-1 - B-2 Thermostat temperature 25°C (77°F) Below 1 Ω


If the result is not as specified, replace the seat cushion heater.