Home › Vehicle Interior › SEAT › FRONT POWER SEAT CONTROL SYSTEM(w/ Memory)
RM27L0U _58 Vehicle Interior _049342 SEAT _0235877 FRONT POWER SEAT CONTROL SYSTEM(w/ Memory) D

SEAT  FRONT POWER SEAT CONTROL SYSTEM(w/ Memory)  SYSTEM DESCRIPTION  


FRONT POWER SEAT CONTROL SYSTEM DESCRIPTION


a.

The driver seat is equipped with slide, reclining, lifter, front vertical, lumbar support and leg support adjustment functions.


b.

The passenger seat is equipped with slide, reclining and lumbar support adjustment functions.



FUNCTION OF MAIN COMPONENT


The following functions are available.

Component Function
Sliding motor Receives signal from front power seat switch, motor operates, and seat slides forward and rearward.
Reclining motor Receives signal from front power seat switch, motor operates, and seat tilts and reclines.
Front vertical motor Receives signal from front power seat switch, and seat cushion front rises and lowers vertically.
Lifter motor Receives signal from front power seat switch, and seat cushion rises and lowers vertically.
Lumbar support motor Receives signal from front power seat lumbar switch, and lumbar support can be adjusted.
Leg support motor Receives signal from leg support adjustment switch, motor operates, and seat cushion front opens and closes.
Seat position sensor Is built into each seat adjuster and sends position data to front power seat switch so that it can detect seat positions at all times.
Front power seat switch Based on switches operated, seat adjuster signals are input into power seat control and seat is adjusted accordingly.
Front power seat lumbar switch Based on switches operated, seat adjuster signals are input into switch and seat is adjusted accordingly.
Leg support adjustment switch Based on switches operated, seat adjuster signals are input into switch and seat is adjusted accordingly.
Seat memory switch When SET switch and memory switch are pressed simultaneously, signal is input to outer mirror control ECU and seat position is recorded.
Then, when memory switch is pressed, signal is input to outer mirror control ECU and seat position changes according to memory.


SYSTEM OPERATION


The front power seat functions that can be adjusted with power seat motors and/or memorized are shown in the chart below.

Seat Adjustment Function Driver Seat Passenger Seat
Fore-and-Aft Slide Power and memory Power
Reclining Power and memory Power
Front Vertical Height Power and memory -
Lifter Power and memory -
Lumbar support Power Power
Leg support Power -


For the driver side memory function, the seat memory switch operation is first transferred from the outer mirror control ECU to the position control ECU and switch via the CAN communication line. Then, either the seat position is stored in memory or a previously stored seat position is recalled.