Home › Vehicle Interior › SEAT › REAR POWER SEAT CONTROL SYSTEM
RM27L0U _58 Vehicle Interior _049342 SEAT _0235879 REAR POWER SEAT CONTROL SYSTEM U

SEAT  REAR POWER SEAT CONTROL SYSTEM  TERMINALS OF ECU  


CHECK FOLD SEAT CONTROL ECU LH


U153155E02
4.594,0.375 4.875,0.552 0.281,0.177 10 false O33 2.813,0.365 3.094,0.542 0.281,0.177 10 false O34

a.

Disconnect the O33 and O34 ECU connectors.


b.

Measure the voltage and resistance of the wire harness side connectors.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
O33-4 (+B) - O33-8 (GND) P - W-B Power source (Battery) Always 11 to 14 V
O33-8 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
O33-9 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
O33-10 (+B2) - O33-9 (GND2) V - W-B Power source (Battery) Always 11 to 14 V
O34-3 (IG) - O33-8 (GND) R - W-B Power source (IG) Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V

If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the O33 and O34 ECU connectors.


d.

Measure the voltage and resistance of the connectors.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
O33-1 (FLD+) - O33-8 (GND) B - W-B No. 2 reclining motor operation signal Ignition switch ON
Rear power seat switch LH forward
11 to 14 V
O33-2 (RCL+) - O33-8 (GND) SB - W-B No. 1 reclining motor operation signal Ignition switch ON
Rear power seat switch LH forward
11 to 14 V
O33-5 (FLD-) - O33-8 (GND) W - W-B No. 2 reclining motor operation signal Ignition switch ON
Rear power seat switch LH backward
11 to 14 V
O33-6 (RCL-) - O33-8 (GND) R - W-B No. 1 reclining motor operation signal Ignition switch ON
Rear power seat switch LH backward
11 to 14 V
O34-4 (R CL) - O33-8 (GND) G - W-B Rear door courtesy switch signal Rear door courtesy switch LH OFF 11 to 14 V
Rear door courtesy switch LH ON Below 1 V
O34-5 (BDCY) - O33-8 (GND) V - W-B Back door courtesy switch signal Back door courtesy switch OFF 11 to 14 V
Back door courtesy switch ON Below 1 V
O34-10 (FLD2) - O33-8 (GND) BE - W-B No. 2 fold switch signal (Folding) Rear LH door open
No. 2 fold seat switch LH OFF
11 to 14 V
Rear LH door open
No. 2 fold seat switch LH folding
Below 1 V
O34-12 (RCLF) - O33-8 (GND) LG - W-B Reclining forward switch signal Always 11 to 14 V
Rear power seat switch LH forward Below 1 V
O34-13 (RCLR) - O33-8 (GND) SB - W-B Reclining backward switch signal Always 11 to 14 V
Rear power seat switch LH backward Below 1 V
O34-14 (RTN2) - O33-8 (GND) BR - W-B No. 2 return switch signal (Return) Rear LH door open
No. 2 fold seat switch LH OFF
11 to 14 V
Rear LH door open
No. 2 fold seat switch LH return
Below 1 V
O34-15 (RTRN) - O33-8 (GND) B - W-B No. 1 return switch signal (Return) Back door open
No. 1 fold seat switch LH OFF
11 to 14 V
Back door open
No. 1 fold seat switch LH return
Below 1 V
O34-16 (FOLD) - O33-8 (GND) P - W-B No. 1 fold switch signal (Folding) Back door open
No. 1 fold seat switch LH OFF
11 to 14 V
Back door open
No. 1 fold seat switch LH folding
Below 1 V
O34-22 (SRCL) - O34-36 (SG2) G - V Reclining position sensor signal Motor is operating Below 1 V ←→ 11 to 14 V
Pulse generation
O34-25 (SV2) - O34-36 (SG2) L - V Position sensor power supply Back door open 11 to 14 V
O34-31 (IND3) - O33-8 (GND) W - W-B No. 2 fold seat switch indicator signal Rear LH door open
No. 2 fold seat switch LH ON:
·

When the system detects that an object is caught.

·

When the seat operation conditions are not met.


Below 1 V ←→ 11 to 14 V
Pulse generation
When the indicator is illuminated 9 to 13 V
O34-32 (P) - O33-8 (GND) GR - W-B Park/Neutral position switch signal Ignition switch ON
Park/Neutral position switch P position
11 to 14 V
Ignition switch ON
Park/Neutral position switch not in P position
Below 1 V
O34-35 (IND1) - O33-8 (GND) Y - W-B No. 1 fold seat switch indicator signal Back door open
No. 1 fold seat switch LH ON:
·

When the system detects that an object is caught.

·

When the seat operation conditions are not met.


Below 1 V ←→ 11 to 14 V
Pulse generation
When the indicator is illuminated 9 to 13 V
O34-36 (SG2) - Body ground V - Body ground Position sensor ground Always Below 1 Ω

If the result is not as specified, the ECU may have a malfunction.



CHECK FOLD SEAT CONTROL ECU RH


U153156E02
4.625,0.344 4.885,0.521 0.26,0.177 10 false P19 2.802,0.354 3.063,0.531 0.26,0.177 10 false P20

a.

Disconnect the P19 and P20 ECU connectors.


b.

Measure the voltage and resistance of the wire harness side connectors.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
P19-4 (+B) - P19-8 (GND) LG - W-B Power source (Battery) Always 11 to 14 V
P19-8 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
P19-9 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
P19-10 (+B2) - P19-9 (GND2) B - W-B Power source (Battery) Always 11 to 14 V
P20-3 (IG) - P19-8 (GND) P - W-B Power source (IG) Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V

If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the P19 and P20 ECU connectors.


d.

Measure the voltage and resistance of the connectors.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
P19-1 (FLD+) - P19-8 (GND) G - W-B No. 2 reclining motor operation signal Ignition switch ON
Rear power seat switch RH forward
11 to 14 V
P19-2 (RCL+) - P19-8 (GND) BE - W-B No. 1 reclining motor operation signal Ignition switch ON
Rear power seat switch RH forward
11 to 14 V
P19-5 (FLD-) - P19-8 (GND) R - W-B No. 2 reclining motor operation signal Ignition switch ON
Rear power seat switch RH backward
11 to 14 V
P19-6 (RCL-) - P19-8 (GND) W - W-B No. 1 reclining motor operation signal Ignition switch ON
Rear power seat switch RH backward
11 to 14 V
P20-4 (R CL) - P19-8 (GND) G - W-B Rear door courtesy switch signal Rear door courtesy switch RH OFF 11 to 14 V
Rear door courtesy switch RH ON Below 1 V
P20-5 (BDCY) - P19-8 (GND) G - W-B Back door courtesy switch signal Back door courtesy switch OFF 11 to 14 V
Back door courtesy switch ON Below 1 V
P20-10 (FLD2) - P19-8 (GND) BE - W-B No. 2 fold switch signal (Folding) Rear RH door open
No. 2 fold seat switch RH OFF
11 to 14 V
Rear RH door open
No. 2 fold seat switch RH folding
Below 1 V
P20-12 (RCLF) - P19-8 (GND) LG - W-B Reclining forward switch signal Always 11 to 14 V
Rear power seat switch RH forward Below 1 V
P20-13 (RCLR) - P19-8 (GND) SB - W-B Reclining backward switch signal Always 11 to 14 V
Rear power seat switch RH backward Below 1 V
P20-14 (RTN2) - P19-8 (GND) SB - W-B No. 2 return switch signal (Return) Rear RH door Open
No. 2 fold seat switch RH OFF
11 to 14 V
Rear RH door Open
No. 2 fold seat switch RH return
Below 1 V
P20-15 (RTRN) - P19-8 (GND) B - W-B No. 1 return switch signal (Return) Back door open
No. 1 fold seat switch RH OFF
11 to 14 V
Back door open
No. 1 fold seat switch RH return
Below 1 V
P20-16 (FOLD) - P19-8 (GND) P - W-B No. 1 fold switch signal (Folding) Back door open
No. 1 fold seat switch RH OFF
11 to 14 V
Back door open
No. 1 fold seat switch RH folding
Below 1 V
P20-22 (SRCL) - P20-36 (SG2) G - V Reclining position sensor signal Motor is operating Below 1 V ←→ 11 to 14 V
Pulse generation
P20-25 (SV2) - P20-36 (SG2) L - V Position sensor power supply Back door open 11 to 14 V
P20-31 (IND3) - P19-8 (GND) W - W-B No. 2 fold seat switch indicator signal Rear RH door open
No. 2 fold seat switch RH ON:
·

When the system detects that an object is caught.

·

When the seat operation conditions are not met.


Below 1 V ←→ 11 to 14 V
Pulse generation
When the indicator is illuminated 9 to 13 V
P20-32 (P) - P19-8 (GND) GR - W-B Park/Neutral position switch signal Ignition switch ON
Park/Neutral position switch P position
11 to 14 V
Ignition switch ON
Park/Neutral position switch not in P position
Below 1 V
P20-35 (IND1) - P19-8 (GND) L - W-B No. 1 fold seat switch indicator signal Back door open
No. 1 fold seat switch RH ON:
·

When the system detects that an object is caught.

·

When the seat operation conditions are not met.


Below 1 V ←→ 11 to 14 V
Pulse generation
When the indicator is illuminated 9 to 13 V
P20-36 (SG2) - Body ground V - Body ground Position sensor ground Always Below 1 Ω

If the result is not as specified, the ECU may have a malfunction.