Wear protective gloves. Sharp areas on the parts may injure your hands.
73580A
1.REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY
71692C
2.REMOVE REAR SEAT LOCK COVER INNER LH
Remove the screw.
Detach the 3 claws and remove the rear seat lock cover inner LH.
71691B
3.REMOVE REAR SEAT LOCK COVER OUTER RH
Remove the screw.
Detach the 2 claws and remove the rear seat lock cover outer RH.
4.REMOVE REAR NO. 2 SEAT CUSHION ASSEMBLY RH
Remove the 2 bolts.
Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts and 2 bushes. Then remove the rear No. 2 seat cushion assembly RH.
79360A
5.REMOVE NO. 3 SEAT CUSHION SPRING ASSEMBLY RH
Remove the hog rings.
Detach the hooks and remove the No. 3 seat cushion spring assembly RH.
79021
6.REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH
Remove the hog rings and No. 2 seat cushion cover sub-assembly RH from the No. 2 seat cushion pad.
72998
7.REMOVE REAR SEAT CUSHION COVER LH
Remove the screw.
Detach the claw and remove the rear seat cushion cover LH.
72995C
8.REMOVE REAR SEAT CUSHION COVER OUTER RH
Remove the screw.
Detach the claw and remove the rear seat cushion cover outer RH.
71970
9.REMOVE REAR SEAT HEADREST ASSEMBLY
Using a screwdriver, push in the headrest lock button to release the headrest lock.
Tape the screwdriver tip before use.
Pull up and remove the rear seat headrest assembly.
When removing the rear seat headrest assembly while it is in the vehicle, fold down the headrest before removing it so that it does not contact the roof.
72909
10.REMOVE REAR NO. 2 SEAT HANDLE
Remove the 2 screws.
Disconnect the rear No. 1 seat lock cable assembly and remove the rear No. 2 seat handle.
72067
11.REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY RH
Remove the screw.
Disconnect the rear No. 1 seat lock cable assembly and remove the rear back lock control lever sub-assembly RH.
71701C
12.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH
Detach the 9 clips and remove the rear seatback board sub-assembly RH.
71931C
13.REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY
Detach the 4 claws and remove the 2 rear No. 2 seat headrest supports.
14.REMOVE SEATBACK COVER WITH PAD
Detach the hook.
Detach the hooks and remove the seatback cover with pad.
79023
15.REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY RH
Remove the hog rings and No. 2 seatback cover sub-assembly RH from the No. 2 seatback pad.
71879D
16.REMOVE REAR SEAT RECLINING COVER INNER LH
Remove the screw.
Detach the claw and remove the rear seat reclining cover inner LH.
71878D
17.REMOVE REAR SEAT RECLINING COVER INNER RH
Remove the screw.
Detach the claw and remove the rear seat reclining cover inner RH.
72620D
18.REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY
Detach the 3 cable ties.
Disconnect the 2 clamps.
Rotate the cable ends.
Pull the rear No. 1 seat lock cable assembly through the No. 3 seatback frame sub-assembly RH and remove the rear No. 1 seat lock cable assembly.
79303A
19.REMOVE NO. 3 SEATBACK FRAME SUB-ASSEMBLY RH
Remove the 5 bolts and No. 3 seatback frame sub-assembly RH.
71607
20.REMOVE REAR NO. 2 SEAT ROD SUB-ASSEMBLY
Remove the 2 bolts and rear No. 2 seat rod sub-assembly.