Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type RH Side)
RM27L0U _58 Vehicle Interior _049342 SEAT _0235884 REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type RH Side) G

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type RH Side)  INSPECTION  


PROCEDURE

Hide 85820X 1.INSPECT POWER SEAT MOTOR ASSEMBLY RH

B443250E01
0.844,2.26 1.958,2.438 1.115,0.177 10 false Counterclockwise 2.229,2.281 2.917,2.458 0.688,0.177 10 false Clockwise 4.156,0.208 6.563,0.615 2.406,0.406 10 false Component without harness connected: (Power Seat Motor)

a.

Check operation of the power seat motor assembly.

i.

Apply battery voltage to the power seat motor and check the operation of the power seat motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1
Battery negative (-) → 2
Motor gear rotates clockwise
Battery positive (+) → 2
Battery negative (-) → 1
Motor rear rotates counterclockwise


If the result is not as specified, replace the power seat motor.



Hide 85820Y 2.INSPECT POWER SEAT MOTOR ASSEMBLY LH

B443238E01
0.99,2.323 2.125,2.51 1.135,0.188 10 false Counterclockwise 2.458,2.313 3.594,2.5 1.135,0.188 10 false Clockwise 4.417,0.25 6.844,0.635 2.427,0.385 10 false Component without harness connected: (Power Seat Motor)

a.

Check operation of the power seat motor.

i.

Apply battery voltage to the power seat motor and check the operation of the power seat motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1
Battery negative (-) → 2
Motor gear rotates clockwise
Battery positive (+) → 2
Battery negative (-) → 1
Motor rear rotates counterclockwise


If the result is not as specified, replace the power seat motor assembly.