Home › Vehicle Interior › SEAT › REAR SEATBACK HEATER
RM27L0U _58 Vehicle Interior _049342 SEAT _0235887 REAR SEATBACK HEATER G

SEAT  REAR SEATBACK HEATER  INSPECTION  


PROCEDURE

Hide 87510N 1.INSPECT REAR SEATBACK HEATER ASSEMBLY LH

B200253E01
0.186,0.324 2.698,0.670 2.513,0.345 10 Component without harness connected: (Rear Seatback Heater) 0.902,1.866 1.016,2.022 0.114,0.156 10 A 2.463,1.864 2.584,2.006 0.121,0.142 10 B

a.

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A1 - B5 Always Below 1 Ω
A2 - B4 Always Below 1 Ω
A3 - B3 Always Below 1 Ω
A4 - B2 Always Below 1 Ω
A1 - B1 Seatback heater temperature 20°C (68°F) 4.9 to 5.9 Ω


If the result is not as specified, replace the seatback heater.



Hide 87510M 2.INSPECT REAR SEATBACK HEATER ASSEMBLY RH

B200253E01
0.186,0.324 2.698,0.670 2.513,0.345 10 Component without harness connected: (Rear Seatback Heater) 0.902,1.866 1.016,2.022 0.114,0.156 10 A 2.463,1.864 2.584,2.006 0.121,0.142 10 B

a.

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A1 - B5 Always Below 1 Ω
A2 - B4 Always Below 1 Ω
A3 - B3 Always Below 1 Ω
A4 - B2 Always Below 1 Ω
A1 - B1 Seatback heater temperature 20°C (68°F) 4.9 to 5.9 Ω


If the result is not as specified, replace the seatback heater.