Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM
RM27L0U _58 Vehicle Interior _049343 SEAT BELT _0235888 SEAT BELT WARNING SYSTEM D

SEAT BELT  SEAT BELT WARNING SYSTEM  SYSTEM DESCRIPTION  


SEAT BELT WARNING SYSTEM DESCRIPTION


If a seat belt is not fastened, this system flashes the seat belt warning light or sounds the seat belt warning buzzer as a reminder.

a.

Seat belt warning light (for driver side):

When the driver seat belt is not fastened with the ignition switch ON, the driver seat belt warning light on the combination meter blinks to inform the driver. The center airbag sensor detects the driver seat belt status and sends signals to the meter ECU using CAN.


b.

Passenger seat belt warning light (for front passenger side):

When the passenger seat belt is not fastened with the ignition switch ON and the passenger seat occupied, the passenger seat belt warning light on the integration control and panel displays. The integration control and panel displays the passenger seat belt status and whether the passenger seat is occupied.


c.

Seat belt warning buzzer:

i.

When the ignition switch is turned to ON while the driver seat belt is not fastened, the seat belt warning buzzer in the combination meter sounds at an interval of 1.2 seconds 5 times.


ii.

When the vehicle is driven at approximately 20 km/h (12 mph) or more while the driver or front passenger seat belt is not fastened, the buzzer sounds at an interval of 1.2 seconds for 9.6 seconds, and then the buzzer sounds at an interval of 0.4 seconds for 20 seconds.




FUNCTION OF MAIN COMPONENT


The following functions are available.

Component Function
Front seat inner belt LH (driver side buckle switch) Informs center airbag sensor of the driver side seat belt condition (fastened or unfastened).
Front seat inner belt RH (passenger side buckle switch) Informs center airbag sensor of the front passenger side seat belt condition (fastened or unfastened).
Occupant detection sensor Informs center airbag sensor of the front passenger side seat condition (occupied or unoccupied).
Driver seat belt warning light If driver seat belt is unfastened and the ignition switch is ON, the meter ECU flashes the seat belt warning light of the combination meter as a reminder.
Front passenger seat belt warning light When front passenger seat is occupied and the ignition switch is ON, if the passenger seat belt is unfastened, the meter ECU flashes the seat belt warning light on the integration control and panel as a reminder.
Seat belt warning buzzer If driver or front passenger seat belt is unfastened and the ignition switch is ON, the meter ECU sounds the buzzer as a reminder.


SYSTEM OPERATION


a.

Driver seat belt warning light:

i.

When the driver seat belt is not fastened with the ignition switch ON, check that the driver seat belt warning light on the meter comes on to inform the driver.



b.

Front passenger seat belt warning light:

i.

When the front passenger seat belt is not fastened with the ignition switch ON and the front passenger seat occupied, check that the front passenger side seat belt warning light on the integration control and panel blinks.