Home › Vehicle Interior › SEAT BELT › REAR NO. 2 SEAT OUTER BELT ASSEMBLY
RM27L0U _58 Vehicle Interior _049343 SEAT BELT _0235899 REAR NO. 2 SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR NO. 2 SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73360C 1.INSPECT REAR SEAT OUTER BELT ASSEMBLY

a.
B194802E01
2.059,0.214 2.387,0.375 0.328,0.161 10 45°

Check the ELR.

i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the operation is not as specified, replace the seat belt assembly.



b.

Check the fastening function of the child restraint system.

NOTICE:

The check should be performed with the outer belt installed.


i.

When the belt is pulled out fully, the belt should automatically start to retract.


ii.

After the belt has fully retracted, the belt should be able to be pulled out and retracted again.

If the operation is not as specified, replace the belt assembly.