Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR
RM27L0U _58 Vehicle Interior _049344 HEATING / AIR CONDITIONING _0235915 COMPRESSOR G

HEATING / AIR CONDITIONING  COMPRESSOR  INSPECTION  


PROCEDURE

Hide 88410 1.INSPECT MAGNET CLUTCH ASSEMBLY

I104344E08
0.615,3.698 0.896,3 false 1.083,2.01 1.281,1.01 false 2.719,3.802 3.188,3.99 0.469,0.188 10 false Battery 0.188,3.708 0.906,4.021 0.719,0.313 10 false Magnet Clutch Hub 1.333,0.917 2.646,1.083 1.313,0.167 10 false Magnet Clutch Rotor 0.115,0.063 2.646,0.396 2.531,0.333 10 false Component without harness connected: (Magnet clutch)

a.

Check the magnet clutch operation.

i.

Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 of the magnet clutch, and the negative lead is connected to the ground wire.

If the operation is not as specified, replace the magnet clutch assembly.



b.

Measure the resistance.


c.

Measure the resistance between terminals 1 and 2.

Standard resistance:

165 to 205 Ω at 25°C (77°F)

If the resistance is not as specified, replace the cooler compressor assembly.