88474
1.INSTALL COOLER DRYER
Using pliers, install the cooler dryer onto the modulator.
Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.
ND-OIL 8 or equivalent
Using a 14 mm straight hexagon wrench, install the cap onto the cooler condenser core.
88467A
2.INSTALL NO. 2 COOLER CONDENSER CUSHION
Install the 2 cushions to the cooler condenser.
88467
3.INSTALL NO. 1 COOLER CONDENSER CUSHION
Install the collar to the cushions.
Install the 2 cushions to the cooler condenser.