63650A
1.REMOVE ROOF CONSOLE BOX ASSEMBLY (for Short Type)
Disengage the 2 guides and using a "TORX" socket wrench T20, remove the 4 screws.
Disconnect the connector and then remove the roof console box.
63650A
2.REMOVE ROOF CONSOLE BOX ASSEMBLY (for Long Type)
Using a screwdriver, disengage the 4 claws and remove the lens.
Disengage the 2 guides and using a "TORX" socket wrench T20, remove the 6 screws.
Disconnect the connector and then remove the roof console box.