58835C
1.INSTALL CONSOLE BOX ORNAMENT
Install the console box ornament with the 2 screws.
67003C
2.INSTALL REAR DOOR PANEL CUSHION
Install the 2 cushions.
58907
3.INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
Install the door hinge with the 4 screws.
Engage the 4 claws and install the console box retainer.
Install the 10 screws.
58915B
4.INSTALL REAR CONSOLE COMPARTMENT DOOR BOX COVER
Install the door box cover with the 7 screws.
5.INSTALL REAR CONSOLE ARMREST HINGE SUB-ASSEMBLY
Install the armrest hinge with the 6 screws.
67003C
6.INSTALL REAR DOOR PANEL CUSHION
Install the 2 cushions.
7.INSTALL CONSOLE COMPARTMENT DOOR BOX INSERT
Install the door box insert with the 6 screws.
8.INSTALL CONSOLE COMPARTMENT DOOR LOCK LEVER
Install the door lock lever with the 2 screws.
58849
9.INSTALL NO. 2 CONSOLE BOX HOLE COVER
Engage the 2 claws and install the console box hole cover.
58933
10.INSTALL CONSOLE REAR END PANEL GARNISH
Engage the 6 clips and install the console rear end panel garnish.
58812A
11.INSTALL CONSOLE BOX LOWER
Install the console box lower with the 10 screws.
58833B
12.INSTALL CONSOLE UPPER PANEL NO. 2 GARNISH
Install the console upper panel garnish with the 7 screws.
58833B
13.INSTALL CONSOLE UPPER PANEL NO. 1 GARNISH
Install the console upper panel garnish with the 7 screws.
58917A
14.INSTALL CONSOLE BOX COVER REAR
Engage the 2 claws and 4 clips and install the console box rear cover.
Install the 2 screws.
58906
15.INSTALL UPPER CONSOLE DOOR SUB-ASSEMBLY
Install the upper console door with the 5 screws.
58886A
16.INSTALL EQUIPMENT SET PANEL COVER
Engage the 4 clips and install the equipment set panel cover.
Install the 2 screws.
55622
17.INSTALL NO. 1 INSTRUMENT PANEL CUP HOLDER SPRING
Install the cup holder spring to the cup holder rail.
58816B
18.INSTALL CONSOLE BOX INSERT
Engage the 2 claws and install the console box insert.
Install the 5 screws.
58811B
19.INSTALL CONSOLE BOX
Install 2cup holder rails to the new console box.
Install the console box.
58810J
20.INSTALL CONSOLE BOX ASSEMBLY
Engage the 4 clips and install the console box.