84810D
1.INSPECT REAR POWER WINDOW SWITCH
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 (D) - 2 (SD)
3 (B) - 4 (U) |
UP | Below 1 Ω |
| 1 (D) - 2 (SD)
4 (U) - 5 (SU) |
OFF | Below 1 Ω |
| 1 (D) - 3 (B)
4 (U) - 5 (SU) |
DOWN | Below 1 Ω |
If the result is not as specified, replace the power window switch.