Home › Vehicle Exterior › WINDOW / GLASS › BACK DOOR POWER WINDOW MOTOR
RM27L0U _59 Vehicle Exterior _049347 WINDOW / GLASS _0235947 BACK DOOR POWER WINDOW MOTOR G

WINDOW / GLASS  BACK DOOR POWER WINDOW MOTOR  INSPECTION  


PROCEDURE

Hide 85710G 1.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

a.
B194351E01
0.085,0.002 2.554,0.519 2.469,0.517 10 Component without harness connected: (Power Window Regulator Motor assembly RH) 0.05,2.815 1.220,2.985 1.170,0.170 10 Counterclockwise 0.05,1.423 0.734,1.607 0.684,0.184 10 Clockwise

Check the operation of the regulator motor.

i.

Apply battery voltage to the regulator motor and check the operation of the regulator motor.

OK:
Measurement condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Motor gear rotates clockwise
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Motor gear rotates counterclockwise


If the result is not as specified, replace the power window regulator motor.