Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER WIRE
RM27L0U _59 Vehicle Exterior _049347 WINDOW / GLASS _0235949 WINDOW DEFOGGER WIRE A

WINDOW / GLASS  WINDOW DEFOGGER WIRE  REPAIR  


PROCEDURE

Hide 68131 1. IF NECESSARY, REPAIR DEFOGGER WIRE

a.
B106758E08
1.101,1.401 2.035,1.602 0.934,0.201 10 Repair Point 0.111,0.935 0.666,1.310 0.555,0.376 10 Masking Tape 2.341,1.258 3.136,1.459 0.794,0.201 10 Broken Wire 1.7,0.937 1.597,1.37 false 2.876,0.848 2.799,1.248 false 1.065,0.618 0.799,1.072 0.799,1.072 1.088,1.052 false

Clean the broken wire tips with grease, wax and silicone remover.


b.

Place masking tape along both sides of the wire.


c.
B106759

Thoroughly stir the repair agent ("DuPont" paste No. 4817 or the equivalent).


d.

Using a fine tip brush, apply a small amount of the agent to the wire.


e.

After a few minutes, remove the masking tape.

NOTICE:

Do not repair the defogger wire again for at least 24 hours.