Home › Vehicle Exterior › WINDOW / GLASS › RELAY
RM27L0U _59 Vehicle Exterior _049347 WINDOW / GLASS _0235951 RELAY G

WINDOW / GLASS  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84794A 1.INSPECT FRONT WIPER DEICER RELAY

a.
E109078E21
0.292,1.385 0.771,1.594 0.479,0.208 10 false Battery 0.281,2.74 0.979,2.927 0.698,0.188 10 false Ohmmeter

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 When battery voltage not applied 10 kΩ or higher
3 - 5 Apply battery voltage to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the front wiper deicer relay.



Hide 85912 2.INSPECT DEFOGGER RELAY

a.
E106620E04
1.531,2.927 1.271,2.677 false 2.052,3.073 2.344,3.313 false 1.802,3.375 1.802,3.719 false 1.76,2.74 1.76,2.552 false 1.688,2.969 1.427,2.531 false 2.302,4.26 3.01,4.438 0.708,0.177 10 false Ohmmeter 0.458,1.875 0.958,2.073 0.5,0.198 10 false Battery 0.573,4.26 1.302,4.448 0.729,0.188 10 false Ohmmeter 1.156,2.573 1.292,2.75 0.135,0.177 10 false 1 2.396,3.292 2.521,3.479 0.125,0.188 10 false 2 1.76,3.75 2.302,4.063 0.542,0.313 10 false 3 1.344,2.375 1.458,2.542 0.115,0.167 10 false 4 1.719,2.344 1.844,2.521 0.125,0.177 10 false 5

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 When battery voltage is not applied Below 1 Ω
3 - 4 When battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 5 When battery voltage is not applied 10 kΩ or higher
3 - 5 When battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the defogger relay.