Home › Vehicle Exterior › DOOR / HATCH › HOOD SUPPORT
RM27L0U _59 Vehicle Exterior _049349 DOOR / HATCH _0235956 HOOD SUPPORT N

DOOR / HATCH  HOOD SUPPORT  DISPOSAL  


PROCEDURE

Hide 53450A 1.DISPOSE OF HOOD SUPPORT ASSEMBLY

a.
B166020E02
1.419,1.433 1.552,1.590 0.133,0.157 10 A 2.9,1.433 3.033,1.590 0.133,0.157 10 B 1.85,1.419 2.606,1.765 0.757,0.346 10 200 mm (7.87 in.)

Secure the hood support assembly horizontally in a vise with the piston-rod pulled out.


b.

Wear safety glasses. Use a metal saw to slowly cut a groove between A and B shown in the illustration to release the gas.

NOTICE:

Although the gas inside the back door stay assembly is colorless, odorless, and harmless, metal debris may scatter. Therefore, cover the back door stay assembly with a piece of cloth or other material.