53629
1.REMOVE HOOD LOCK CONTROL CABLE COVER
Remove the 2 screws.
Detach the claw and remove the hood lock control cover.
53510
2.REMOVE HOOD LOCK ASSEMBLY
Using a screwdriver with its tip wrapped in protective tape, remove the hood lock nut cap.
Remove the 2 bolts and nut.
Remove the hood lock.
Disconnect the connector.
Disconnect the hood lock control cable.
53601
3.REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Disengage the 3 claws.
Disconnect the hood lock control cable and remove the hood lock control lever sub-assembly.
53630
4.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
Using a screwdriver with its tip wrapped in protective tape, disconnect the clamps shown in the illustration.
Pull the cable from the engine room and remove it.