Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR OPENER SWITCH
RM27L0U _59 Vehicle Exterior _049349 DOOR / HATCH _0235961 BACK DOOR OPENER SWITCH G

DOOR / HATCH  BACK DOOR OPENER SWITCH  INSPECTION  


PROCEDURE

Hide 69211C 1.INSPECT BACK DOOR OUTSIDE HANDLE

a.
B190834E03
2.34,2.464 2.843,2.609 0.503,0.145 10 Pushed 1.823,3.032 2.137,3.188 0.314,0.156 10 Free 0.275,0.015 2.764,0.336 2.489,0.321 10 Component without harness connected: (Back Door Opener Switch)

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Position Specified Condition
1 - 2 Back door opener switch not pushed 10 kΩ or higher
1 - 2 Back door opener switch pushed Below 1 Ω


If the result is not specified, replace the switch assembly.