Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM27L0U _59 Vehicle Exterior _049349 DOOR / HATCH _0235966 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  INSTALLATION  


PROCEDURE

Hide 68956B 1.INSTALL BACK DOOR STAY UPPER BRACKET

B192154

a.

Apply adhesive to the threads of the 2 bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or Equivalent



b.

Install the back door stay upper bracket with the 2 bolts.

Torque:
20 N*m (199 kgf*cm, 14 ft.*lbf)


Hide 68957 2.INSTALL BACK DOOR STAY LOWER BRACKET

B195040

a.

Apply adhesive to the threads of the 2 bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or Equivalent



b.

Install the back door stay lower bracket with the 2 bolts.

Torque:
20 N*m (199 kgf*cm, 14 ft.*lbf)


Hide 68911B 3.INSTALL BACK DOOR STAY COVER

B195439

a.

Engage the clips and install the back door stay cover.


Hide 69463A 4.INSTALL BACK DOOR SIDE STOPPER

B195433

a.

Install the back door side stopper with the 2 bolts.

Torque:
7.8 N*m (80 kgf*cm, 69 in.*lbf)


Hide 81560 5.INSTALL REAR COMBINATION LIGHT ASSEMBLY

a.

Install the rear combination light assembly (see page Vehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY>INSTALLATION).


Hide 68908 6.INSTALL BACK DOOR DAMPER STAY SUB-ASSEMBLY

a.
B192151

Install the back door damper stay sub-assembly with the lower side stop ring.


b.
B192153

Install the upper side stop ring.

NOTICE:

Install the back door damper stay sub-assembly while supporting the back door by hand.