Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
68908
1.REMOVE BACK DOOR DAMPER STAY SUB-ASSEMBLY
Using a screwdriver with its tip wrapped in protective tape, remove the upper side stop ring.
Using a screwdriver with its tip wrapped in protective tape, remove the lower side stop ring and back door damper stay sub-assembly.
81560
2.REMOVE REAR COMBINATION LIGHT ASSEMBLY
Remove the rear combination light assembly (see page Vehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY>REMOVAL).
69463A
3.REMOVE BACK DOOR SIDE STOPPER
Remove the 2 bolts and remove the back door side stopper.
68911B
4.REMOVE BACK DOOR STAY COVER
Disengage the 3 clips and remove the back door stay cover.
68957
5.REMOVE BACK DOOR STAY LOWER BRACKET
Remove the 2 bolts and remove the back door stay lower bracket.
68956B
6.REMOVE BACK DOOR STAY UPPER BRACKET
Remove the 2 bolts and remove the back door stay upper bracket.