DESCRIPTION
The power back door ECU (power back door drive unit) controls the vehicle's power back door system functions. Power back door system data and Diagnostic Trouble Codes (DTCs) can be read through the vehicle's Data Link Connector 3 (DLC3).
When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs.
CHECK DLC3
Check the DLC3 (See page General>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>GENERAL INFORMATION).
INSPECT BATTERY VOLTAGE
Measure the battery Voltage.
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.