When a voltage and current malfunction (open or short) is detected in the clutch circuit of the power back door drive unit while the power back door is operating, the power back door ECU outputs DTC B2225.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2225 | Voltage and current malfunction in clutch circuit of power back door drive unit | Power back door drive unit (Power back door ECU) |
Clear the DTCs (See page Vehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM>DTC CHECK / CLEAR).
NEXT
Check for DTCs (See page Vehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM>DTC CHECK / CLEAR).
DTC B2225 is not output.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG