Home › Vehicle Exterior › DOOR / HATCH › POWER BACK DOOR SYSTEM
RM27L0U _59 Vehicle Exterior _049349 DOOR / HATCH _0235968 POWER BACK DOOR SYSTEM A

DOOR / HATCH  POWER BACK DOOR SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1. CUSTOMIZE

HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Connect the Techstream to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the Techstream on.


d.

Enter the following menus: Customize Setting.


e.

Select the setting by referring to the table below.

Power Back Door System
Display (Item) Default Function Setting
PBD SW Operation 0.8 s Function that turns power back door closer switch ON when switch is pushed once or held down for 0.8 sec. 0.8s / ON
PBD Buzzer ON This function makes the power back door buzzer sound when power back door is operating ON/OFF
Wireless PBD Operation 0.8 s Function that operates power back door when transmitter switch is pressed in specified way 1 Oper / 2 Oper / 0.8 s / OFF / 1 Motion