87906B
1.INSPECT OUTER REAR VIEW MIRROR GLASS LH (w/ Blind Spot Monitor)
Do not apply battery voltage to terminal 3 or 6 of the EC mirror.
Check the blind spot monitor indicator operation.
Connect a positive (+) lead from the battery to terminal 7 (+) and a negative (-) lead to terminal 5 (-).
Check that the blind spot monitor indicator comes on.
blind spot monitor indicator comes on.
| *a | Component without harness connected
(Outer rear view mirror glass LH) |
If the result is not as specified, replace the outer rear view mirror glass LH.
87901B
2.INSPECT OUTER REAR VIEW MIRROR GLASS RH (w/ Blind Spot Monitor)
Do not apply battery voltage to terminal 3 or 6 of the EC mirror.
Check the blind spot monitor indicator operation.
Connect a positive (+) lead from the battery to terminal 7 (+) and a negative (-) lead to terminal 5 (-).
Check that the blind spot monitor indicator comes on.
blind spot monitor indicator comes on.
| *a | Component without harness connected
(Outer rear view mirror glass RH) |
If the result is not as specified, replace the outer rear view mirror glass RH.