Use the same procedure for the LH side and RH side.
The procedure listed below is for the LH side.
87906B
1.REMOVE OUTER REAR VIEW MIRROR GLASS (w/o Mirror Heater)
Push the upper part of the mirror surface and tilt it.
Apply protective tape, as shown in the illustration.
Using a moulding remover, push the bottom of the glass upwards as shown in the illustration. Slide the glass upwards to detach the 4 claws, and remove the outer rear view mirror glass.
87906B
2.REMOVE OUTER REAR VIEW MIRROR GLASS (w/ Mirror Heater)
Push the upper part of the mirror surface and tilt it.
Apply protective tape, as shown in the illustration.
Using a moulding remover, push the bottom of the glass upwards as shown in the illustration. Slide the glass upwards to detach the 4 claws, and remove the outer rear view mirror glass.
Disconnect the connectors.