Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM
RM27L0U _59 Vehicle Exterior _049351 WIPER / WASHER _0235977 WIPER AND WASHER SYSTEM L

WIPER / WASHER  WIPER AND WASHER SYSTEM  PRECAUTION  


WASHER NOZZLE ADJUSTMENT PRECAUTION


a.

Do not clean or adjust the washer nozzle using objects such as needles or safety pins, because;

i.

The washer nozzle tip is made of resin and could be damaged.


ii.

Adjustment is not necessary as the washer nozzle is a spray type.



b.

If the washer nozzle is clogged with substances such as car wax, remove it and clean the nozzle hole with a soft resin brush or similar tool.



REAR WIPER AND WASHER OPERATION


a.

When the following conditions are satisfied, rear wiper and washer are driven.

·

Ignition switch is ON

·

Back door power window is initialized (See page Vehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM>INITIALIZATION).

·

Back door power window glass is in fully closed condition.

·

Back door power window regulator switch or tail gate control switch is not operated*.


HINT:

*: This condition is for the rear wiper only.