Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
53932B
1.REMOVE FRONT END PANEL (w/o Headlight Cleaner System)
Remove the 2 clips.
Disengage the 2 clips and remove the front end panel.
53932B
2.REMOVE FRONT END PANEL (w/ Headlight Cleaner System)
Remove the 2 clips.
Disengage the 2 claws and 2 clips and remove the front end panel.
81150
3.REMOVE HEADLIGHT ASSEMBLY
Remove the 2 screws.
Remove the bolt.
Disconnect the connectors, and then remove the headlight.