Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY
RM27L0U _59 Vehicle Exterior _049352 LIGHTING (EXT) _0235991 SIDE TURN SIGNAL LIGHT ASSEMBLY G

LIGHTING (EXT)  SIDE TURN SIGNAL LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 87906B 1.INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH

a.
B166379E01
2.563,2.759 3.016,2.940 0.453,0.181 10 TS+ 1.163,2.759 1.615,2.940 0.453,0.181 10 TS- 2.511,2.887 2.095,3.394 false 0.118,1.89 2.656,2.345 2.538,0.454 10 Component without harness connected: (Outer Rear View Mirror LH) 1.496,2.874 1.911,3.381 false

Check the door mirror turn indicator.

i.

Apply battery voltage to the terminals of the connector, and check the LED illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 3 (TS+)
Battery negative (-) → Terminal 4 (TS-)
Door mirror turn indicator illuminates


If the result is not as specified, replace the mirror assembly.



Hide 87901B 2.INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY RH

a.
B166380E01
2.56,2.762 3.013,2.943 0.453,0.181 10 TS+ 1.16,2.762 1.612,2.943 0.453,0.181 10 TS- 2.508,2.89 2.092,3.396 false 0.115,1.893 2.653,2.347 2.538,0.454 10 Component without harness connected: (Outer Rear View Mirror RH) 1.492,2.877 1.908,3.383 false

Check the door mirror turn indicator.

i.

Apply battery voltage to the terminals of the connector, and check the LED illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 3 (TS+)
Battery negative (-) → Terminal 4 (TS-)
Door mirror turn indicator illuminates