Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY
RM27L0U _59 Vehicle Exterior _049352 LIGHTING (EXT) _0235992 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE REAR COMBINATION LIGHT GASKET

a.
E161826

Remove the rear combination light gasket.

NOTICE:
·

Detach the gasket if it adheres to the body.

·

Do not reuse a removed gasket. Replace it with a new one to prevent water from entering.




Hide 81550H 2.REMOVE TAIL AND STOP LIGHT BULB

a.
E161827

Turn the tail and stop light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.


b.

Remove the tail and stop light bulb from the light socket.


Hide 81550L 3.REMOVE REAR TURN SIGNAL LIGHT BULB

a.
E161829

Turn the rear turn signal light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.


b.

Remove the rear turn signal light bulb from the light socket.