Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY
RM27L0U _59 Vehicle Exterior _049352 LIGHTING (EXT) _0235994 LICENSE PLATE LIGHT ASSEMBLY G

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81270 1.INSPECT LICENSE PLATE LIGHT ASSEMBLY

a.
E161856E01
0.097,0.038 2.616,0.414 2.518,0.377 10 Component without harness connected: (License Plate Light)

Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.


b.

Check that the light comes on.

OK:

The light comes on.


If the result is not as specified, replace the bulb or license plate light.