84306
1.REMOVE SPIRAL CABLE SUB-ASSEMBLY
Remove the spiral cable sub-assembly (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SPIRAL CABLE>REMOVAL).
84650
2.REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
Disconnect the 2 connectors.
Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the wiper switch.
Do not press the claw too hard, as it may be damaged.
84140
3.REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY
Disconnect the connector.
Remove the headlight dimmer switch, as shown in the illustration.
Disengage the 2 claws and remove the headlight dimmer switch.