Home › Vehicle Exterior › HORN › INTEGRATION RELAY
RM27L0U _59 Vehicle Exterior _049353 HORN _0236007 INTEGRATION RELAY G

HORN  INTEGRATION RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 82641 1.INSPECT INTEGRATION NO.1 RELAY (Built in horn relay)

a.

Check the resistance of the horn relay.

B443220E01
3,0.615 3.458,0.802 0.458,0.188 10 false Battery 2.865,1.604 3.542,1.781 0.677,0.177 10 false Ohmmeter

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A8 - T6 When battery voltage is not applied 10 kΩ or higher
A8 - T6 When battery voltage is applied to terminal A7 and T6 Below 1 Ω


If the result is not as specified, replace the integration relay.