Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF RACK
RM27L0U _59 Vehicle Exterior _049355 EXTERIOR PANELS / TRIM _0236014 ROOF RACK A

EXTERIOR PANELS / TRIM  ROOF RACK  INSTALLATION  


PROCEDURE

Hide 63479 1.INSTALL ROOF INNER RACK RETAINER

B191699

a.

Install the roof inner rack retainer.


Hide 2.INSTALL ROOF RACK LEG CENTER CUSHION LH

B195992

a.

Engage the 3 claws and install the roof rack leg center cushion.


Hide 3.INSTALL ROOF RACK LEG CENTER CUSHION RH

Hide 63489 4.INSTALL ROOF RACK LEG REAR CUSHION LH

B191697

a.

Engage the 2 claws and install the roof rack leg rear cushion.


Hide 63488 5.INSTALL ROOF RACK LEG REAR CUSHION RH

HINT:

Use the same procedure as for the LH side.


Hide 63487A 6.INSTALL ROOF RACK LEG FRONT CUSHION LH

B191696

a.

Engage the 2 claws and install the roof rack leg front cushion.


Hide 63486A 7.INSTALL ROOF RACK LEG FRONT CUSHION RH

HINT:

Use the same procedure as for the LH side.


Hide 63474 8.INSTALL ROOF RACK REAR LEG LH

B191695

a.

Install the roof rack rear leg with the 2 screws.


Hide 63473 9.INSTALL ROOF RACK REAR LEG RH

HINT:

Use the same procedure as for the LH side.


Hide 63472 10.INSTALL ROOF RACK FRONT LEG LH

B191693

a.

Install the roof rack front leg with the 2 screws.


Hide 63471B 11.INSTALL ROOF RACK FRONT LEG RH

HINT:

Use the same procedure as for the LH side.


Hide 63404A 12.INSTALL ROOF RACK CENTER SUPPORT SUB-ASSEMBLY LH

B191692

a.

Using a "TORX" socket wrench T30, install the roof rack center support LH with the 2 screws.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


Hide 63408C 13.INSTALL ROOF CARRIER SUB-ASSEMBLY LH

B191691

a.

Using a "TORX" socket wrench T30, install the roof carrier LH with the 6 screws.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


Hide 63409A 14.INSTALL ROOF RACK CENTER SUPPORT SUB-ASSEMBLY

B191690

a.

Using a "TORX" socket wrench T30, install the roof rack center support with the 4 screws.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


Hide 63403A 15.INSTALL ROOF RACK CENTER SUPPORT SUB-ASSEMBLY RH

B191689

a.

Using a "TORX" socket wrench T30, install the roof rack center support RH with the 2 screws.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


Hide 63407C 16.INSTALL ROOF CARRIER SUB-ASSEMBLY RH

a.

Provisionally install the roof rack center support into the roof carrier.


b.
B191688

Using a "TORX" socket wrench T30, install the roof carrier RH with the 6 screws.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


c.
B191687

Using a "TORX" socket wrench T30, install the 4 screws.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


Hide 63494 17.INSTALL ROOF RACK LEG REAR COVER LH

B191686

a.

Engage the 3 claws and clip and install the roof rack leg rear cover.


Hide 63493 18.INSTALL ROOF RACK LEG REAR COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 63496 19.INSTALL ROOF RACK LEG CENTER COVER LH

B191685

a.

Engage the 2 claws and clip and install the roof rack leg center cover.


Hide 63495B 20.INSTALL ROOF RACK LEG CENTER COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 63492 21.INSTALL ROOF RACK LEG FRONT COVER LH

B191684

a.

Engage the 3 claws and clip and install the roof rack leg front cover.


Hide 63491 22.INSTALL ROOF RACK LEG FRONT COVER RH

HINT:

Use the same procedure as for the LH side.