Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF DRIP SIDE FINISH MOULDING
RM27L0U _59 Vehicle Exterior _049355 EXTERIOR PANELS / TRIM _0236020 ROOF DRIP SIDE FINISH MOULDING A

EXTERIOR PANELS / TRIM  ROOF DRIP SIDE FINISH MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 75552 1.REMOVE ROOF DRIP SIDE FINISH MOULDING

a.
B191709E02
1.333,1.083 1.813,1.688 false 1.844,1.635 2.896,1.896 1.052,0.26 10 true Protective Tape

Apply protective tape to the roof panel in the area around the roof drip side finish moulding.


b.
B191710

Disengage the 2 clips and remove the roof drip side finish moulding.

NOTICE:
·

Do not remove the clips.

·

Replace the clips with new clips if damaged.