Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR WINDOW FRAME MOULDING
RM27L0U _59 Vehicle Exterior _049355 EXTERIOR PANELS / TRIM _0236023 REAR DOOR WINDOW FRAME MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR WINDOW FRAME MOULDING  INSTALLATION  


PROCEDURE

Hide 75766A 1.INSTALL REAR DOOR WINDOW FRAME REAR MOULDING

HINT:

When installing the rear door window frame rear moulding, heat the vehicle body and rear door window frame rear moulding using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Rear Door Window Frame Rear Moulding 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body or rear door window frame rear moulding excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body surface.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B256636E02
1.135,0.177 1.583,0.177 1.583,0.177 1.771,0.448 false 0.333,0.073 1.177,0.396 0.844,0.323 10 false Double-sided Tape

Install a new rear door window frame rear moulding.

i.

Using a heat light, heat a new rear door window frame rear moulding and the vehicle body surface.


ii.

Remove the peeling paper from the face of the rear door window frame rear moulding.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Attach the 2 clips and double-sided tape to install the rear door window frame rear moulding.

HINT:

When installing the rear door window frame rear moulding, be sure to press the area attached with the double-sided tape with sufficient force {30 N (3 kgf, 6.7 lbf) or more}.