75766A
1.REMOVE REAR DOOR WINDOW FRAME REAR MOULDING
When removing the rear door window frame rear moulding, heat the vehicle body and rear door window frame rear moulding using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Rear Door Window Frame Rear Moulding | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or rear door window frame rear moulding excessively.
Put protective tape around the rear door window frame rear moulding.
Using a moulding remover, detach the 2 clips and remove the double-sided tape to remove the rear door window frame rear moulding.