Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › DYNAMIC LASER CRUISE CONTROL SYSTEM

DTC    P0607    Control Module Performance

for Preparation Click here


DESCRIPTION

This DTC indicates a malfunction in the ECM.

HINT:
The ECM receives signals from each sensor to control all the functions of the cruise control with the microcomputer. When a malfunction is detected, fail-safe remains on until the ignition switch is turned off.


DTC No.
DTC Detection Condition
Trouble Area
P0607
ECM has a supervisory CPU and control ECU inside. When each input STP signal is different for 0.15 seconds or more, this trouble code is output. This trouble code is also output after 0.4 seconds has passed from the time a cruise cancel input signal (STP input) is input to the ECM.
ECM

INSPECTION PROCEDURE

1.REPLACE ECM
  1. Replace the ECM (Click here).


NEXT

END