Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function)

POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function) > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
Troubleshoot in accordance with the procedures on the following pages.



1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK

      NEXT


      3.PROBLEM SYMPTOMS TABLE
      1. When problem is not listed on problem symptoms table, proceed to A.

      2. When problem is listed on problem symptoms table, proceed to B.



      B.
      GO TO STEP 5
      A


      4.PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM
      1. Data list / Active test.

        HINT:
        Click here

      2. Circuit inspection.


      NEXT


      5.ADJUST, REPAIR OR REPLACE

        NEXT


        6.RESET POWER WINDOW REGULATOR MOTOR
        1. If the AUTO switch (driver side switch) light of the power window master switch is blinking after the repair, reset the power window motor (Click here).


        NEXT

        END