Home › TRANSMISSION ยท U151E AUTOMATIC TRANSAXLE › PARK / NEUTRAL POSITION SWITCH

PARK / NEUTRAL POSITION SWITCH > REMOVAL

for Preparation Click here



1. REMOVE BATTERY


2. REMOVE AIR CLEANER ASSEMBLY

HINT:
(Click here)



3. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY


    D030614
  1. Remove the nut from the control shaft lever.

  1. Disconnect the control cable from the control shaft lever.



    D025415
  1. Remove the clip and disconnect the control cable from the control cable bracket.

    NOTICE:
    Do not hold the resin guide pipe.



4. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    C092283
  1. Disconnect the park/neutral position switch connector.



    C099458
  1. Remove the nut, washer and control shaft lever.



    C099457
  1. Using a screwdriver, pry up the lock plate.



    G025453
  1. Remove the lock nut and the lock plate.



    C099454
  1. Remove the 2 bolts and pull out the park/neutral position switch.