Home › TRANSMISSION ยท U151F AUTOMATIC TRANSAXLE › SPEED SENSOR

SPEED SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL SPEED SENSOR (NC SENSOR)


    C090570
  1. Coat the O-ring with ATF.

  1. Install the speed sensor with the bolt.

    Torque:
    11 N*m{ 115 kgf*cm , 8 ft.*lbf }

    HINT:
    Make sure to install the same manufacturer's sensor.

  1. Connect the speed sensor connector.



2. INSTALL SPEED SENSOR (NT SENSOR)


    C090569
  1. Coat the O-ring with ATF.

  1. Install the speed sensor with the bolt.

    Torque:
    11 N*m{ 115 kgf*cm , 8 ft.*lbf }

    HINT:
    Make sure to install the same manufacturer's sensor.

  1. Connect the speed sensor connector.



3. INSTALL AIR CLEANER ASSEMBLY

HINT:
(Click here)



4. INSTALL BATTERY