BLOWER UNIT (for Rear Air Conditioning System) > REMOVAL |
| 1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM |
| 2. REMOVE REAR DOOR SCUFF PLATE RH |
![]() |
Using a screwdriver, disengage the 8 clips and remove the scuff plate.
| 3. REMOVE BACK DOOR SCUFF PLATE |
![]() |
Remove the 3 bolts.
Using a screwdriver, disengage the 6 clips and remove the scuff plate.
| 4. REMOVE QUARTER TRIM PANEL ASSEMBLY FRONT RH |
![]() |
Remove the floor anchor cover.
Remove the bolt and disconnect the rear No. 2 seat belt on the floor anchor side.
![]() |
Remove the 2 package holder net hooks.
Using a screwdriver, disengage the claw and remove the courtesy light.
Disconnect the courtesy light connectors.
Using a screwdriver, disengage the 16 clips and remove the quarter trim panel assembly.
| 5. REMOVE ROOF HEADLINING GARNISH REAR |
![]() |
Using a screwdriver, disengage the 6 clips and remove the headlining garnish.
| 6. REMOVE RR WINDOW SIDE GARNISH ASSEMBLY NO.2 RH |
![]() |
Using a screwdriver, disengage the 2 claws and remove the cover of the rear No. 2 seat belt on the shoulder anchor side.
Remove the bolt and disconnect the rear No. 2 seat belt assembly on the shoulder anchor side.
![]() |
Using a screwdriver, disengage the 5 clips and remove the side garnish.
| 7. REMOVE AIR DUCT ASSEMBLY |
![]() |
Remove the 2 clips and the air duct assembly from the air conditioning blower assembly.
| 8. REMOVE COVER SUB-ASSEMBLY |
![]() |
Disengage the 2 claw fittings and remove the cover sub-assembly.
| 9. REMOVE AIR DUCT ASSEMBLY |
![]() |
Remove the air duct assembly.
| 10. DISCONNECT HEATER HOSE |
![]() |
Release the claw fittings and release the heater hose clamp.
Using pliers, grip the claws of the 2 clips and slide the clip to disconnect the 2 heater hoses.
| 11. DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY |
![]() |
Remove the 2 bolts and disconnect the air conditioning tube & accessory assembly.
| 12. REMOVE AIR CONDITIONING BLOWER ASSEMBLY |
![]() |
Disconnect the 4 connectors, release the 3 clamps and separate the wire harness.
![]() |
Remove the 3 bolts and the air conditioning blower assembly.