REAR NO. 2 SEAT ASSEMBLY (w/ Power Stowing Function) > INITIALIZATION |
| INITIALIZATION RELEASE PROCEDURE |
Press and hold the stowing/return switch.
Within 10 seconds of pressing and holding the stowing/return switch, press the folding switch 5 times with the stowing/return switch held down.
If the folding switch is pressed 5 times within 10 seconds of pressing and holding the stowing/return switch, the initialization release operation is complete.
| INITIALIZATION PROCEDURE |
Press the stowing/return switch to set the seat to the original state.
Press and hold the power rear no. 2 seat switch until the seat is completely folded down.
Continue pressing the power rear no. 2 seat switch for another 1 second with the seat folded down. Initialization is complete and the buzzer sounds.