Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Manual Seat)

FRONT SEAT ASSEMBLY (for Manual Seat) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SEAT ASSEMBLY LH


    B089353
  1. Place the seat assembly in the cabin.

    NOTICE:
    Be careful not to damage the body.

  1. Connect the connectors under the seat assembly.

  1. Tighten the 2 bolts on the front side of the seat assembly.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }

  1. Tighten the 2 bolts on the rear side of the seat assembly.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }

  1. Install the 2 seat track covers.



2. INSTALL FRONT SEAT HEADREST ASSEMBLY


3. CHECK SRS WARNING LIGHT

HINT:
Click here



4. CHECK SEAT SLIDE ADJUSTER LOCKS


5. INITIALIZE OCCUPANT CLASSIFICATION SYSTEM

HINT:
Click here