Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84810
1.INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
Install power window regulator switch assembly (1) on front door trim board sub-assembly RH (2) and clip it in on both sides of the marked area.
67601
2.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
Click hereVehicle Exterior>DOOR / HATCH>FRONT DOOR>REASSEMBLY
81230
3.INSTALL COURTESY LIGHT ASSEMBLY (w/ Courtesy Light)
Use the same procedure as for the LH side.
Click hereVehicle Interior>LIGHTING (INT)>DOOR COURTESY LIGHT>INSTALLATION