50819
1.REMOVE FRONT FLOOR COVER
32971
2.REMOVE TRANSMISSION OIL THERMOSTAT
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Loosen nuts (1).
Guide out and remove No. 1 floor heat insulator (2).
Loosen the bolt (1).
Pull the oil cooler tubes (2) out of the transmission oil thermostat (3) and set aside.
Drain, catch and dispose of the automatic transmission fluid.
Loosen the bolt (1).
Pull the transmission oil thermostat (2) out of the connections on the automatic transmission assembly and remove.