Home › Drivetrain › 8HP51 (AUTOMATIC TRANSMISSION / TRANSAXLE) › TORQUE CONVERTER RADIAL SHAFT SEAL
RM3650E _52 Drivetrain _079902 8HP51 AUTOMATIC TRANSMISSION / TRANSAXLE _0387754 TORQUE CONVERTER RADIAL SHAFT SEAL A

8HP51 AUTOMATIC TRANSMISSION / TRANSAXLE  TORQUE CONVERTER RADIAL SHAFT SEAL  REMOVAL  


PROCEDURE

Hide 3.REMOVE TORQUE CONVERTER RADIAL SHAFT SEAL

CAUTION:
·

Materials harmful to health.

Contact with fluids harmful to health!

-

Note and follow safety information on containers.

-

Conduct all work in appropriate personal protective equipment only.




NOTICE:
·

Damage to the automatic transmission assembly.

Damage to the automatic transmission assembly through unapproved automatic transmission fluid.

-

Use only the approved Automatic Gearbox Oil ATF 3+.

-

After completion of repair work, check automatic transmission fluid level.




a.
C413413

Pull out the torque converter radial shaft seal (1) with the special tools 0 496 716 (24 1 420) and 0 493 321 (13 5 250).

SST
09300-WA050  
09200-WA210