Use the same procedure for LHD and RHD vehicles.
The following procedure is for LHD vehicles.
81080J
1.REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for Driver Side)
Using a molding remover A, detach the claw (2) to remove the No. 1 interior illumination light assembly (1) from the No. 1 instrument panel under cover sub-assembly.
Unlock plug connection (1) and disconnect.
Remove No. 1 interior illumination light assembly (2).
55607
2.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Front Passenger Side)
81080J
3.REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for Front Passenger Side)
Detach the claw (2) to remove the No. 1 interior illumination light assembly (1) from the No. 2 instrument panel under cover sub-assembly.